Galvanized laser cutting

Galvanized sheets are used to make parts that we use in different parts of life, which is very important and plays an important role in improving the quality of some galvanized sheet products. One of the advantages of galvanized laser cutting is that when you cut, you have a very smooth surface that you no longer need to sand your work surface because the work done is very precise and high quality. There are very advanced machines that are used for cutting galvanized sheet. You can cut any thickness of galvanized sheet using a laser machine. With a CNC machine, you can fully monitor the performance of the machine, which has a smooth surface when cutting the sheet without the need for sanding.This sheet is used for household purposes, which includes kitchen cabinets, air conditioner duct, gable and heater pipe.

Another factor that galvanized sheets are welcomed and have become very popular is their resistance to moisture and corrosion, which has led to their widespread use in the transportation, agriculture, construction and civil engineering industries. . Galvanized sheets are available in the market in rolls and in standard sizes with thicknesses between 0.18 to 0.6 mm.

What is the method of galvanizing laser cutting?

Due to the high accuracy and very good performance of galvanized laser cutting, many industries today have resorted to this method and use this method, and as we mentioned, one of the reasons for this is the use of this sheet to make various tools. That are available to us. When using a galvanized laser cutting machine, the laser machine can have a minimum cutting width of 0.1 mm to 1 mm, which is an advantage. The laser works in such a way that when the laser is shone on the surface of the galvanized sheet, different parts of the working surface are exposed to very little laser heat, which makes the high quality of the cutting edge at the end of the work and the galvanized sheet deforms. Can not be. Of course, we have to say that you may see very few irregularities on the back of the sheet, which is not a concern, this small problem will be solved when processing.Another advantage of using galvanized cutters is the use of this method to create complex patterns that are done completely automatically. This system can make the job very easy for you, because only by entering the map into the computer software, you can do this without the need for any operations and manpower, and in correction without manual intervention, and completely automatically. The only manpower you need will be the system operator who will be in charge of controlling the cutting machine. As mentioned earlier, the galvanizing cutting system is such that the device emits laser light and focuses it on a surface. At this time, to prevent the spread of molten material, a coaxial gas jet is used to repel these materials.

Laser cutting on galvanized parts can be done with the help of a cnc machine. To do this, you can use three different methods called flame cutting, fusion and remote. Nitrogen gas is used in the fusion method to remove molten material from the shell. Note that the use of nitrogen gas in this method is not possible because nitrogen gas can not react with molten materials. However, in the flame method, nitrogen gas is used to remove the molten material, because this gas can increase the energy input to the galvanized laser cutting mechanism by exothermic reactions. In the method of remote laser cutting, with the help of a concave mirror or a special lens, the laser beam can be shone on the desired surface. This beam will be the size of a dot and has high strength and density to make the cut.

Do not forget that observing the focal length is an important and basic factor in order to create a correct and appropriate cut. There are many advanced laser machines on the market for making galvanized laser cutters that you can use according to your needs.