RADOX CNC CUTTING MACHINE, ROBOTIC & AUTOMATION
CNC Plasma cutting machine RADOX CUTFIRE 100i (GERMANY) 2m * 6m
.JPG)
RADOX PLASMA CNC CUTTING MACHINE CUTFIRE 100i (GERMANY)
RADOX presented the latest international engineering achievements in the field of CNC cutting equipment after years of research and experience. Unique capabilities of the latest models of CNC PLASMA cutting machine is described below.
RADOX PLASMA CNC CUTTING MACHINE CUTFIRE 100i (GERMANY) TECHNICAL SPECIFICATION
RADOX CUTFIRE CNC has been produced in Iran under the supervision of a German company , and due to the high capabilities and accuracy of this type of CNC, it has the ability to be installed and compatible with all types of international plasma units.
The controllers used in RADOX CUTFIRE is among the latest achievements of RADOX, and one of the advantages of this model is that they are very easy to use for the operator of the device.
Regarding the plasma unit used in RADOX CUTFIRE, it can be said that it can cut the materials up to 40mm with good quality and is suitable for medium thicknesses.
CNC TECHNICAL DATA
| 2010 mm (depends on order | Effective Cutting Width |
|---|---|
| 6010 mm (depends on order | Effective Cutting Length |
| 2500 kg | Weight ~ |
| 1500 mm | Height |
| Max thickness=300 mm | Flame cutting torch |
| 15000 mm/ min | Max positioning speed |
| + 0.15mm/m | Positioning Accuracy |
| 300 mm | Torch Vertical Movement |
| Linear motion Guide(LM guide | X Motion |
| Rack and Pinion | Y Motion |
| Screw-LM guide-AC servo motor | Z axis |
| Rail machining of all axis | |
| Strong Industrial profiles structure , Integrated table | |
| Double drive (two AC servo motors in both axis | |
| Sparker | |
| CNC pipe cutter addable | |
| 5 axis CNC beveller addable | |
| Gear box zero back lash | |
| Water tank (optional) |
RADOX C2 CONTROLLER
| 100A | Cutting current at 100% duty cycle |
|---|---|
| 1-30mm | Cutting range |
| up to 20mm | Piercing |
| 710×280×590mm | Dimensions (L × W × H) |
| 50 kg | Mass |
| flash 100 , 101 | Plasma torch |
PLASMA UNIT CUT FIRE 100i TECHNICAL DATA
| 100A | Cutting current at 100% duty cycle |
|---|---|
| 1-30mm | Cutting range |
| up to 20mm | Piercing |
| 710×280×590mm | Dimensions (L × W × H) |
| 50 kg | Mass |
| flash 100 , 101 | Plasma torch |
PLASMA UNIT HYPERTHERM (USA) POWER MAX 105 TECHNICAL DATA
| Cut speed | Thickness | Capacity |
|---|---|---|
| Cutting | ||
| 1-1/4” | 20 ipm | |
| 10 ipm | 1-1/2” | Recommended |
| 7/9 | Pierce* | |
| Groove profile | Metal removal rate | Capacity |
| Gouging | ||
| .25” D x .29” W | 21.7Ibs per hour | Typical gouge |
| Gas supply Clean , dry , oil-free air or nitrogen | ||
| Recommended gas inlet flow rate/Pressure:Cutting 460 scfh @ 85 psi , Gouging: 480 scfh , 8.0 scfm @ 70 psi |
5 year CNC warranty. After sales service 15 years
Contact the company's experts
WhatsApp : +49-1578008355
Start a conversation
Choose a Radox expert and chat on WhatsApp.
Our experts usually respond in minutes.